SveaBot M100E | INeedRobot

Overview

The SveaBot M100E is built for very large floors, cleaning up to 5,590 square metres per hour and lifting productivity well above conventional machines. An 860 mm cleaning width, 120 L solution tank and 18 kPa suction keep big spaces moving.

It runs fully autonomously with automatic path planning, obstacle avoidance and route memory, and switches easily between autonomous and manual modes when a job calls for it. Three brush-pressure levels leave no residual dirt.

Sensing combines 2D and 3D LiDAR, four depth cameras and ultrasonic radar, while a blind-spot detection system, rear camera and automatic braking keep operation safe. It handles slopes up to 15 degrees at full load.

Best suited for

WarehousesFactoriesAirports and transport hubsFacility management

What it does well

Cleans up to 5,590 square metres per hour
860 mm path with 120 L tank
Autonomous path planning and route memory
Switches between autonomous and manual modes
2D and 3D LiDAR with depth cameras
Blind-spot detection and automatic braking

Technical specifications

Dimensions: 166 × 94 × 147.5 cm (without squeegee); 171.5 × 112 × 147.5 cm (with squeegee)
Maximum speed: Up to 6.5 km/h
Charging time: ≤ 4.5 h
Battery life: Up to 3.5 h
Weight: 318 kg
Cleaning width: 860 mm
Cleaning efficiency: 5,590 m²/h
Suction power: ≥ 18 kPa
Clean water tank: 120 L
Waste water tank: 140 L
Detergent tank: 5 L
Maximum slope: ≤ 15° (26%)